Cisco 300-135 Question Answer

The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions.
The fault condition is related to switch technology?

A. NTP
B. Switch-to-Switch Connectivity
C. Loop Prevention
D. Access Vlans
E. VLAN ACL Port ACL
F. Switch Virtual Interface
G. Port Security

Answer: D


The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions.
What is the solution to the fault condition?

A. In Configuration mode, using the interface range Fastethernet 1/0/1 2, then switchport mode access vlan 10 command.
B. In Configuration mode, using the interface range Fastethernet 1/0/1 2, then switchport access mode vlan 10 command.
C. In Configuration mode, using the interface range Fastethernet 1/0/1 2, then switchport vlan 10 access command.
D. In Configuration mode, using the interface range Fastethernet 1/0/1 2, then switchport access vlan 10 command.

Answer: D

Cisco 300-135 Questions Answers

The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of
this fault and answer the following questions. What is the solution to the fault condition?

A. R1
B. R2
C. R3
D. R4
E. DSW1
F. DSW2
G. ASW1
H. ASW2

Answer: G
 

The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions. The fault condition is related to switch technology?

A. NTP
B. Switch-to-Switch Connectivity
C. Loop Prevention
D. Access Vlans
E. VLAN ACL Port ACL
F. Switch Virtual Interface
G. Port Security

Answer: D

Cisco 300-135 Question Answer

The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, and FHRP services, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions. The fault condition is related to which technology?

A. NTP
B. Switch-to-Switch Connectivity
C. Access Vlans
D. Port Security
E. VLAN ACL / Port ACL
F. Switch Virtual Interface

Answer: B



The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, and FHRP services, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions. What is the solution to the fault condition?

A. In Configuration mode, using the interface port-channel 13 command, then configure switchport trunk allowed vlan none followed by switchport trunk allowed vlan 20,200 commands.
B. In Configuration mode, using the interface port-channel 13, port-channel 23, then configure switchport trunk none allowed vlan none followed by switchport trunk allowed vlan 10,200 commands.
C. In Configuration mode, using the interface port-channel 23 command, then configure switchport trunk allowed vlan none followed by switchport trunk allowed vlan 20,200 commands.
D. In Configuration mode, using the interface port-channel 23, port-channel, then configure switchport trunk allowed vlan none followed by switchport trunk allowed vlan 10,20,200 commands.

Answer: B

Cisco 300-135 Question Answer

The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions. On which device is the fault condition located?

A. R1
B. R2
C. R3
D. R4
E. DSW1
F. DSW2
G. ASW1
H. ASW2

Answer: A                                                    300-135 Exam Braindumps



The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions. The fault condition is related to which technology?

A. BGP
B. NTP
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security

Answer: D

Cisco Bags Zain Group’s IP MPLS Network Expansion Contract

Cisco has said that the Middle East telecommunications operator Zain Group has expanded its next generation of MPLS IP network using its telecommunications equipment.

Zain Group is leveraging Cisco® advanced segment routing platforms and WAN automation to bring the benefits of distributed intelligence and centralized control to your network. Cisco's industry-leading innovation around automation and cloud scale will deliver next-generation network capabilities to Zain Group to enable the simplification, scalability and open innovation that drives business results.

"The demands of the digital age mean that we must prioritize the improvement of speed and efficiency, define a growth strategy based on new services and ensure safety," said Henri Kassab, CEO of International, Wholesale and Roaming, Zain Group . "These are the pillars of our innovation that support our transformation to become an integrated digital lifestyle operator.With the backing of Cisco's leading technology, our network architecture ready for the future positions us well to drive tangible business results. and meet the changing demands of our customers. "

As a telecommunications operator serving more than 45 million customers in eight countries in the Middle East and North Africa, Zain Group's network infrastructure faces increased expectations and workloads driven by the growth of devices and connections. The annual Cisco Visual Networking Index (Cisco VNI) forecasts a 12-fold increase in mobile data traffic in the Middle East and Africa from 2016 to 2021, a compound annual growth rate of 65 percent.

Implementation is a bold move towards network automation and represents a significant step towards a more flexible network that offers high bandwidth, improved application intelligence for 5G and a significantly improved end-user experience that defines the network of the future . Cisco technology will also help the Zain Group optimize network operations and offer a richer set of differentiated services.

"Segment routing capabilities, automation and our best routing engines allow Zain Group to implement a programmable network that allows them to quickly adapt to the future needs of customers," said Ali Amer, General Sales Director of Service Providers. Global, Cisco Center. East and Africa. "By quickly tracking its network automation, Zain Group is future proof for its network with an agile, scalable and secure architecture that supports its growth strategy and improves its competitiveness."

Other benefits that Zain Group will obtain by modernizing its global MPLS IP architecture include simplified operations, programmability, scalability and increased network availability.

The Cisco Visual Networking Index predicts that by 2021, the Middle East and Africa will have 2.4 billion devices on the network (up from 1.7 billion in 2016) and 1.4 network devices per capita, while 75% of all networked devices will be connected to mobile devices in 2021..

Cisco 300-135 Question Answer

The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions.
What is the solution to the fault condition?

A. Under the BGP process, enter the bgp redistribute-internal command.
B. Under the BGP process, bgp confederation identifier 65001command.
C. Deleted the current BGP process and reenter all of the command using 65002 as the AS number.
D. Under the BGP process, delete the neighbor 209.56.200.226 remote-as 65002
command and enter the neighbor 209.65.200.226 remote-as 65002 command.

Answer: D

Cisco 300-135 Question Answer

How would you confirm on R1 that load balancing is actually occurring on the default-network (0.0.0.0)?

A. Use ping and the show ip route command to confirm the timers for each default network resets to 0.
B. Load balancing does not occur over default networks; the second route will only be used for failover.
C. Use an extended ping along with repeated show ip route commands to confirm the gateway of last resort address toggles back and forth.
D. Use the traceroute command to an address that is not explicitly in the routing table.

Answer: D


Which IPsec mode will encrypt a GRE tunnel to provide multiprotocol support and reduced overhead?

A. 3DES
B. multipoint GRE
C. tunnel
D. transport

Answer: D